CS-SR3超塑化剂系列
低水灰比、高强、长坍落度保持的预拌混凝土
用高性能聚羧酸系减水剂
SUPERPLASTICIZER SERIES
CS-SR3
High-performance Polycarboxylate Superplasticizer for Ready-Mixed Concrete with
Low Water-Cement Ratio, Excellent Mechanical Performance and Long Slump Retention
产品描述
超塑化剂CS-SR3是一种专为预拌混凝土工业设计的高性能聚羧酸系高效减水剂,能有效地延长混凝土的凝结时间,保持坍落度,而且不影响早期和后期强度的发展。
超塑化剂CS-SR3与传统的由甲醛、萘磺酸缩聚而成的萘系和木质素磺酸盐减水剂是完全不同的,是一种新的完全不含甲醛的高性能聚羧酸系高效减水剂。与传统的萘系或三聚氰胺类高效减水剂以及第一代丙烯酸盐减水剂相比,超塑化剂CS-SR3在减水作用、延长凝结时间和坍落度保持性等方面具有更优异的性能。
DESCRIPTION
CS-SR3 is a high performance polycarboxylate water-reducing admixture designed specifically for ready-mixed concrete industry.
CS-SR3 can efficiently prolong time of setting, hold slump constant and not influence the compressive performance developing of concrete at early and later ages.
The superplasticizer CS-SR3 is completely different from traditional formaldehyde or lignosulphonate based water-reducing admixtures.CS-SR3 is a new kind of high performance polycarboxylate water-reducing admixture without any formaldehyde. Superior to the earlier generation of acrylic-based copolymers, traditional melamine and naphthalene-sulphonate based water-reducing admixture,
CS-SR3 offers high efficiency in the areas of water reduction, setting time retarding, slump retention.
应用领域
应用超塑化剂CS-SR3的混凝土具有较高的工作度和较大的减水率,在新拌阶段易于施工,硬化后具有优异的力学性能。
超塑化剂CS-SR3尤其适用于水泥用量大于300kg/m 预拌混凝土,以及其他需要高减水作用和很好的坍落度保持性的场合。由于既可以确保工作度,又不降低早期强度,超塑化剂CS-SR3特别适用于生产自密实混凝土。
超塑化剂CS-SR3的主要应用领域:
- 高力学性能与高坍落度保持的预拌混凝土;
- 高温或长时间运输条件下,高力学性能和高工作度保持的新拌混凝土;
- 强度等级达到25-70MPa以上;
- 设计防水、高耐久的混凝土工程;
- 大体积混凝土;
- 自密实混凝土;
- 其高流动性与抗离析的特征使它也适合于快速浇注混凝土工程。
WHERE TO USE
Concrete incorporated CS-SR3 has good workability and high water-reducing rate, easy to construct when freshly mixed and yielding excellent mechanical performance after hardening.
CS-SR3 is particularly ideal for ready-mixed concrete with cement amount higher than 300kg/ m³ and other places where high water reduction is needed and good slump ability should be obtained.
With results of good workability, excellent mechanical strength at early stages, CS-SR3 is particularly ideal for self-compacting concrete.
Main application fields of CS-SR3 are as follows:
- Ready-mixed concrete with high slump retention and high mechanical performance ;
- Fresh concrete requires high mechanical performance and prolonged workability in high temperature or in long time transportation;
- Concrete with strength grade from 25 to 70MPa;
- Waterproofing and high durable concrete;
- For massive concrete;
- Self-compacting concrete;
- For fast casting concrete project benefits from its high flowing ability and bleeding resistance;
技术特性
超塑化剂CS-SR3是高性能聚羧酸系水溶液,此减水剂可有效地分散水泥颗粒,并延缓混凝土中水泥水化反应,延长凝结时间,降低工作度损失。
超塑化剂CS-SR3的技术特性主要表现为以下几点:
- 保持相同工作度时,可减少用水量。增进强度,降低渗透性,并提高耐久性;
- 相同水灰比下,增大工作度;
- 降低水泥水化反应速度,延长混凝土凝结时间,降低新拌混凝土工作度损失;
- 在相同水灰比与工作度下,减少用水量与水泥用量。其技术优势为低收缩﹑低徐变与低水化放热率。
由此,根据超塑化剂CS-SR3的掺量变化(水泥重量的0.5%~1.5%),混凝土能够达到改善工作度,延长凝结时间,长坍落度保持,降低水泥用量等目的。
TECHNICAL CHARACTERISTICS
CS-SR3 consists of a water solution containing acrylic copolymers which can efficiently disperse the cement particles and retard cement hydration of concrete and thus prolong the setting time and decrease loss of workability.
The dispersing ability of CS-SR3 can be used in the following four methods:
- To reduce the amount of water while maintaining the same workability (in this manner, it is possible to increase the mechanical strength of concrete, reduce permeability, and increase durability);
- To increase the workability while maintaining the same water-cement ratio;
- To decrease the hydration velocity of cement, prolong the setting time of concrete, decrease the workability loss of fresh concrete;
- To reduce both the water and the cement content while maintaining the same water-cement ratio and the same workability. Its technical predominance are low shrinkage,low creep and low heat release rate in hydration.
Thus, by adjusting the dosage of CS-SR3 (0.5%-1.5% by weight of cement), the desired properties such as workability, prolonged time of setting, slump retention and decreased cement use of concrete can be obtained.
掺加方法
与传统外加剂(萘系或木质素磺酸盐)越晚掺入,对水泥颗粒的分散效果越好相比,超塑化剂CS-SR3与拌合水一起加入混凝土(同掺法)就能达到最佳的分散效果。
DIRECTIONS FOR USE
Unlike traditional admixtures(such as Naphthalene,Lignosulphonate etc.).whose dispersal action is most efficient when the addition of the mixtures to the mix is postponed.CS-SR3 always develops its maximum dispersal action whenever it is introduced into the concrete(at the start or at the end of the addition of the mixing water).
与其他产品的相容性
超塑化剂CS-SR3与本公司的其他产品是相容的,如因特殊用途需加入特殊外加剂,请向公司技术部门查询。
COMPATIBILITY
CS-SR3 is compatible with other CS Chemical products. Our Technical Team is available to provide evaluation and solution to your queries.
CS-SR3技术参数 |
产品特征 |
状态 液体 |
颜色 琥珀色 |
密度(kg/L) +20℃时为1.05±0.02
1.07±0.02
1.09±0.02 |
固含量 (%) 22±2
25±2
29±2 |
具体作用 增大工作度,减少拌合水,延长凝结时间,长坍落度保持 |
分类 缓凝型高性能聚羧酸系减水剂 |
氯离子含量(%) < 0.01 |
碱含量(%) < 0.1 |
存放 原包装不开封可存放12个月,注意防冻。 |
健康危害性 无 |
CS-SR3 TECHNICAL SPECIFICATIONS |
PRODUCT INFORMATION |
Consistency Liquid |
Color Amber |
Specific Gravity (kg/L) 1.05±0.02
1.07±0.02 at +20℃
1.09±0.02 |
Active Product (%) 22±2
25±2
29±2 |
Specific Usage Increase workability and/or reduce mixing water ,retard cement hydration and slump retention over long period. |
Classification Retarding highly efficient polycarboxylate
water-reducing admixture |
Chloride Content (%) <0.01 |
Alkali Content (%) <0.1 |
Storage 12 months, Keep the product away from frost and avoid direct
exposure to sunlight |
Hazard Classification None |
在混凝土中的性能 (CS-SR3 掺 量0.8%) 固含量 (%) 29 |
技术指标
检测项目(单位) 一等品 合格品 检验结果 |
减水率(%) ≥12 ≥10 28 |
泌水率比 (%) ≤100 38 |
含气量 (%) <5.5 2.6 |
凝结时间差 (min) 初凝 > +90 +169
终凝 +183 |
抗压强度比 (%) 3-days ≥100 169
7-days ≥110 155
28-days ≥110 ≥105 140 |
28d收缩率比 (%) ≤135 106 |
对钢筋锈蚀作用 对钢筋锈蚀有无锈蚀危害 对钢筋锈蚀无锈蚀危害 |
PERFORMANCE DATA (0.8% DOSAGE OF CS-SR3) Active Product (%) 29 |
Properties Standard Index (GB8076-1997) CS-SR3 Test Results
First Grade Standard Grade |
Water Reduction (%) ≥12 ≥10 28 |
Bleeding rate (%) ≤100 38 |
Air content (%) <5.5 2.6 |
Difference in Initial > +90 +169
Setting Time (min) Final +183 |
Rate of Strength(%) 3-days ≥100 169
7-days ≥110 155
28-days ≥110 ≥105 140 |
Shrinkage Rate of 28 days (%) ≤135 106 |
Corrosion to Steel None None |
用量
质量掺量每100公斤水泥0.5~1.5kg。
DOSAGE
From 0.5 to 1.5kg per 100kg of cement.
包装
200升桶装,1000升罐装,亦可散装。
PACKAGING
CS-SR3 is available in 200 liters/barrel, in 1000 liters/tank, and also available in bulk.
储存
密封容器中储存,防止霜冻或在阳光下直接暴晒。
STORAGE
Store in sealed containers, protect from frost and avoid direct exposure to sunlight.
注意
本报告中的技术细节和建议都基于我们多年积累的知识和经验,它们只适用于一般情况,具体情况下的使用应在长期实践中的进行验证。基于这个原因,任何有意使用本产品的人都应在使用前确保本产品在预期情况下的适用性。在任何情况下使用者自己应对使用本产品的后果负责。如有技术问题请向淘正化工在本地的分销商咨询,或直接与淘正化工技术服务部联系。