CS-SP1超塑化剂系列
低水灰比、早期和后期均具有高力学强度的预制混凝土用高性能聚羧酸系减水剂。
SUPERPLASTICIZER SERIES
CS-SP1
High performance polycarboxylate Superplasticizer for precast concrete with Low Water-Cement Ratio and high Mechanical Strength at early and later ages
产品描述
超塑化剂CS-SP1是一种专为预制混凝土工业设计的高性能聚羧酸系高效减水剂，能有效地提高混凝土的早期和后期强度。
超塑化剂CS-SP1与传统的由甲醛、萘磺酸缩聚而成的萘系和木质素磺酸盐减水剂是完全不同的，是一种新的完全不含甲醛的高性能聚羧酸系高效减水剂。与传统的萘系或三聚氰胺类高效减水剂以及第一代丙烯酸盐减水剂相比，超塑化剂CS-SP1在减水作用、早期强度增长等方面具有更优异的性能。
DESCRIPTION
CS-SP1 is a high performance polycarboxylate water-reducing admixture designed specifically for precast concrete and it can effectively improve the compressive strength of concrete at early and later ages.
The superplasticizer CS-SP1 is completely different from traditional formaldehyde or lignosulphonate based water-reducing admixtures. CS-SP1 is a new kind of high performance polycarboxylate water-reducing admixture without any formaldehyde. Superior to the earlier generation of acrylic-based copolymers, traditional melamine and naphthalene-sulphonate based water-reducing admixtures; CS-SP1 offers high efficiency in the areas of water reduction and strength increase at early age.
应用领域
应用超塑化剂CS-SP1的混凝土具有高工作度和高减水率，在新拌阶段易于施工，硬化后具有优异的力学性能。
超塑化剂CS-SP1尤其适用于预制混凝土，以及需高减水率和高早期强度的场合。由于能够在保持高工作性的同时有效提高早期强度的发展，超塑化剂CS-SP1也特别适用于制备自密实混凝土。
超塑化剂CS-SP1的主要应用于以下领域：
l 剪断锚索前最低强度为35MPa的预制先张梁的混凝土；
l 剪断锚索前最低强度为35MPa、并具有良好外观的预制屋面板的混凝土；
l 具超精细表面和良好外观的预制外挂板的混凝土；
l 在快速浇筑工艺中有流动性、抗离析、无需振捣的自密实混凝土;
l 低温、短期施工条件下对早期强度发展有高要求的混凝土。
WHERE TO USE
Concrete incorporated CS-SP1 has good workability and high water-reducing rate, easy to construct when freshly mixed and yielding excellent mechanical performance after hardening.
With high acceleration of compressive strengths at early age and high water reduction rate, CS-SP1 is particularly ideal for precast concrete and wherever such concrete performance is desired. Due to its ability in providing a high workability while increasing the strength development of concrete at early age, CS-SP1 is also especially ideal for preparing self-compacting concrete.
Main application fields of CS-SP1 are as follows:
l Pre-stressed reinforced concrete beams with intensity no less than 35 Mpa after the anchor wire is removed;
l Pre-stressed reinforced concrete roofing slabs with intensity no less than 35 Mpa after the anchor wire is removed along with an excellent surface finishing;
l Precast cladding panels with hyperfine surface and good external appearance finishing;
l Self-compacting concrete with good flowing property, segregation resistance and without vibration in process of fast casting;
l Concrete has high requirement that its compressive strength should develop at early age in short period construct of low temperature.
技术特性
超塑化剂CS-SP1是高性能聚羧酸系水溶液，该减水剂可有效地分散水泥颗粒，并能有效提高混凝土的早期和后期强度。
超塑化剂CS-SP1的技术特性主要表现为以下几点：
l 保持相同工作度时，可减少用水量。增进强度，降低渗透性，并提高耐久性；
l 相同水灰比下，增大工作度；大幅度提高混凝土的早期和后期强度；
l 在相同水灰比与工作度下，减少水与水泥用量。其技术优势为低收缩﹑低徐变与低水化放热率。
因此，根据超塑化剂CS-SP1的掺量变化（水泥质量的0.5%～1.5％），混凝土能够达到提高强度，改善工作度，降低水泥用量等目的。
TECHNICAL CHARACTERISTICS
CS-SP1 consists of a water solution containing acrylic copolymers, which can efficiently disperse the cement particles and increase the compressive strength of concrete in early and later ages.
The dispersing ability of CS-SP1 can be used in the following four methods:
- To reduce the amount of water while maintaining the same workability (in this manner, it is possible to increase the mechanical strength of concrete, reduce permeability, and increase durability);
- To increase the workability while maintaining the same water-cement ratio;
- To greatly increase the compressive strength of concrete at early and later ages;
- To reduce both the water and the cement content while maintaining the same water-cement ratio and the same workability. Its technical predominance are low shrinkage, low creep and low heat release rate in hydration.
Thus, by adjusting the dosage of CS-SP1 (0.5%-1.5%by weight of cement), the desired properties such as strength, workability, and water reduction of concrete can be obtained.
掺加方法
与传统外加剂（萘系或木质素磺酸盐）越晚掺入，对水泥颗粒的分散效果越好相比，超塑化剂CS-SP1与拌合水一起加入混凝土（同掺法）就能达到最佳的分散效果。
APPLICATION
Unlike traditional admixtures(such as Naphthalene,Lignosulphonate etc.).whose dispersal action is most efficient when the addition of the mixtures to the mix is postponed.CS-SP1 always develops its maximum dispersal action whenever it is introduced into the concrete(at the start or at the end of the addition of the mixing water).
与其他产品的相容性
超塑化剂CS-SP1与本公司的其他产品是相容的，如因特殊用途需加入特殊外加剂，请向公司技术部门查询。
COMPATIBILITY
CS-SP1 is compatible with other CS Chemical products. Our Technical Team is available to provide evaluation and solution to your queries.
|
CS-SP1技术参数 |
|
产品特征 |
|
状态 液体 |
|
颜色 琥珀色 |
|
密度(kg/L) +20℃时为1.05±0.02 1.07±0.02 1.09±0.02 |
|
固含量 (%) 22±2 25±2 29±2 |
|
具体作用 增大工作度，减少拌合水在15℃以上时促进早期强度发展 |
|
分类 早强型高性能聚羧酸系减水剂 |
|
氯离子含量(%) <0.01 |
|
碱含量(%) <0.1 |
|
存放 原包装不开封可存放12个月，注意防冻。 |
|
健康危害性 无 |
|
CS-SP1 TECHNICAL SPECIFICATIONS | |
|
PRODUCT INFORMATION | |
|
Consistency |
Liquid |
|
Color |
Amber |
|
Specific Gravity (kg/L) |
1.05±0.02 1.07±0.02 at +20℃ 1.09±0.02 |
|
Active Product (%) |
22±2 25±2 29±2 |
|
Specific Usage |
Increase workability and/or reduce of mixing water and increase early mechanical strength at +15℃ |
|
Classification |
Early strengthening highly efficient polycarboxylate water reducing admixture |
|
Chloride Content (%) |
<0.01 |
|
Alkali Content (%) |
<0.1 |
|
Storage |
12 months, Keep the away protected from frost and aviod direct exposure to sunlight |
|
Hazard Classification |
None |
|
在混凝土中的性能 (CS-SP1 掺 量0.8%) 固含量 (%) 29 |
|
技术指标 检测项目(单位) 一等品 合格品 检验结果 |
|
减水率(%) ≥12 ≥10 29 |
|
泌水率比 (%) ≤95 ≤100 61 |
|
含气量 (%) ≤3.0 ≤4.0 2.9 |
|
凝结时间差 (min) 初凝 -90 to +90 +10 终凝 -60 |
|
抗压强度比 (%) 1-days ≥140 ≥130 193 3-days ≥130 ≥120 192 7-days ≥115 ≥110 170 28-days ≥105 ≥100 153 |
|
28d收缩率比 (%) ≤135 106 |
|
对钢筋锈蚀作用 对钢筋锈蚀有无锈蚀危害 对钢筋锈蚀无锈蚀危害 |
|
PERFORMANCE DATA (0.8% DOSAGE OF CS-SP1) Active Product (%) 29 | |||||
|
Properties |
Standard Index First Grade |
Standard Grade |
CS-SP1 Test Results | ||
|
Water Reduction (%) ≥12 ≥10 29 | |||||
|
Bleeding Rate (%) ≤95 ≤100 61 | |||||
|
Air Content (%) ≤3.0 ≤4.0 2.9 | |||||
|
Difference in Setting Time (min) |
Initial Final |
-90 to +90 |
+10 -60 | ||
|
Rate of Strength(%) |
1-days 3-days 7-days 28-days |
≥140 ≥130 ≥115 ≥105 |
≥130 ≥120 ≥110 ≥100 |
193 192 170 153 | |
|
Shrinkage Rate of 28 days (%) |
≤135 |
106 | |||
|
Corrosion to Steel |
None | ||||
|
|
|
|
|
|
|
用量
质量掺量每100公斤水泥0.5～1.5kg。
DOSAGE
From 0.5 to 1.5kg per 100kg of cement.
包装
200升桶装，1000升罐装，亦可散装。
PACKAGING
CS-SP1 is available in 200 liters/barrel, in 1000 liters/tank, and also available in bulk.
储存
密封容器中储存，防止霜冻或在阳光下直接暴晒。
STORAGE
Store in sealed containers, protect from frost and avoid direct exposure to sunlight.
注意
本报告中的技术细节和建议都基于我们多年积累的知识和经验，它们只适用于一般情况，具体情况下的使用应在长期实践中的进行验证。基于这个原因，任何有意使用本产品的人都应在使用前确保本产品在预期情况下的适用性。在任何情况下使用者自己应对使用本产品的后果负责。如有技术问题请向淘正化工在本地的分销商咨询，或直接与淘正化工技术服务部联系。
ATTENTION
Although the technical details and recommendations contained in the report correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long-term practical application. For this reason, anyone intending to use the product must ensure beforehand that it is suitable for the envisaged application. In every case, theuser alone is fully responsible for any consequences deriving from the use of the product. Please enquire the local sales agency of CS Chemical or directly contact with technical department of CS Chemical if you have any technical problem.
返回主页面
